Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1997 >> MPV LX 2WD V6-3.0L SOHC >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Camshaft Position Sensor >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor: Testing and Inspection

1. Remove the distributor.
2. Remove the PCM.




3. Connect the SSTs (Monitor, Engine signal and Adapter Harness) to the PCM.
4. Turn the ignition switch to ON.
5. Rotate the distributor drive by hand and check the output signal.
6. If not as specified, inspect the following.
(1) Harness continuity




(1) Between PCM terminal 4G and distributor (6-pin) terminal D
(2) Between PCM terminal 4A and distributor (6-pin) terminal A




(3) Between main relay terminal D and distributor (6-pin) terminal B

(2) Distributor (6-pin) terminal B voltage: Battery positive voltage

7. If there is incorrect terminal voltage or harness continuity, replace the distributor. Refer to Distributor/Service and Repair.

Service and Repair
pro multis · About Operation CHARM