Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Mechanical Component Tests

Intake Manifold Vacuum Inspection
1. Verify that the intake-air hoses are installed properly.
2. Stan the engine and let it idle.




3. Measure the intake manifold vacuum by using a vacuum gauge.

Specification: More than 60 kPa (18 in.Hg) @ Idle

4. If not as specified, check following.
- Accelerator cable free play
- Engine compression
- Vacuum leak at:
Fuel injector insulator
Throttle body installation point
Intake manifold installation point
PCV valve installation point

NOTE: Vacuum leaks can be located by engine speed change when lubricant is sprayed on the area where leakage is occuring.