Alternator Belt Replacement

Replacement
FS
1. Remove the A/C and P/S drive belt if equipped. (Refer to section B1.)
2. Loosen the generator mounting bolt and adjusting bolt.
3. Remove the generator drive belt.
4. Install the new generator drive belt and adjust it to specifications.
5. Tighten all bolts to the specified torque.

Tightening torque

Mounting bolt:
32-46 N.m (3.2-4.7 kgf.m, 24-33 ft.lbf}
Adjusting bolt:
16-22 N.m (1.6-2.3 kgt.m, 12-16 ft.lb}

6. Install the A/C and P/S drive belt if equipped, and adjust it to specifications. (Refer to section B1.)

With A/C Tensioner:

Without A/C Tensioner:

KL
1. Loosen tensioner locknut A.
2. Loosen adjuster bolt B.
3. Remove the generator drive belt.
4. Install the new generator drive belt and adjust it to specifications.
5. Adjust the belt deflection by turning adjusting bolt B.
6. Tighten tensioner locknut A.

Tightening torque
Locknut:
32-46 N.m (3.2-4.7 kgf.m, 24-33 ft.lbf}