Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1997 >> Millenia S V6-2.3L DOHC (Miller cycle) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Position Sensor/Switch: Service and Repair





1. Remove the selector rod from the manual shaft lever.
2. Move the manual shaft to the N position.
3. Loosen the transaxle range switch mounting bolts.
4. Align the holes of the transaxle range switch and the manual shaft lever by inserting a pin with an outer diameter of approximately 4.0 mm (0.157 inch).





5. Tighten the transaxle range switch mounting bolts to 2.5 - 3.9 Nm (22 - 34 inch lbs.) and remove the pin.
6. Recheck the continuity of the transaxle range switch.
7. If not correct, replace the transaxle range switch.





8. Install the selector rod to the manual shaft lever.






pro multis · About Operation CHARM