Remote Anti-Theft Personality (RAP) Module

CAUTION:
- Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.

1. Disconnect the battery ground cable.




2. Remove the LH B-pillar trim panel.
3. Remove two mounting nuts and position module aside.
4. Position the RAP module aside.
5. Remove the RAP module.
1. Disconnect electrical connector.
2. Remove the RAP module.

6. Install in reverse order of removal.

Tightening torque: 10 - 14 N.m (102 - 143 kgf.cm, 89 - 125 in.lbf)