Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1998 >> MPV ES 2WD V6-3.0L SOHC >> Repair and Diagnosis >> Heating and Air Conditioning >> Compressor HVAC >> Service and Repair >> Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Installation

1. Discharge the refrigerant from the system.
2. Disconnect the negative battery cable.
3. Remove the air cleaner.
4. Remove the A/C drive belt.
5. Disconnect the flexible hose (HI) and (LO).

CAUTION:
- If moisture or foreign material enters the refrigeration cycle, cooling ability will be lowered and abnormal noise will occur. Always immediately plug all open fittings after removing any refrigeration cycle parts to keep moisture or foreign material out of the cycle.




6. Remove in the order indicated in the table.
7. Install in the reverse order of removal indicated in the table.
8. Reconnect the flexible hose (HI) and (LO).
9. Install and adjust the A/C drive belt.
10. Install the air cleaner.
11. Connect the negative battery cable.
12. Charge the system and test its performance.

A/C Compressor Installation Note
- Remove the following amount of A/C compressor oil from the new A/C compressor when replacing the A/C compressor.

Compressor oil to be removed
200 ml (200 cc, 6.76 fl.oz) - [compressor oil from old A/C compressor + 15 ml (15 cc, 0.5 fl.oz)].
pro multis · About Operation CHARM