Front Differential
FRONT DIFFERENTIAL OIL REPLACEMENT1. Remove the drain plug, filler plug, and washers.
2. Drain the oil into a container.
3. Wipe the plugs clean.
4. Install the drain plug and a new washer.
Tightening torque 40-53 Nm (4.0-5.5 kgf-m, 29-39 ft. lbs.)
5. Add the specified oil through the filler plug hole until the level reaches the brim of the hole.
Specified oil
Type
Above -18°C (0°F): API GL-5, SAE 90
Below -18°C (0°F): API GL-5, SAE 80
Capacity
1.7 L (11.8 US quart, 1.5 Imp quart)
6. Install the filler plug and a new washer.
Tightening torque 40-53 Nm (4.0-5.5 kgf-m, 29-39 ft. lbs.)