Front Differential
FRONT DIFFERENTIAL OIL INSPECTION1. Remove the filler plug and washer.
2. Verify that the oil is up to the brim of the filler plug hole, as shown.
3. If it is low, add the specified oil.
Specified oil
Type
Above -18°C (0°F):API GL-5, SAE 90
Below -18°C (0°F):API GL-5, SAE 80
Capacity
1.7 L (1.8 US quart, 1.5 Imp quart)
4. Install the filler plug and a new washer.
Tightening torque 40-53 Nm (4.0-5.5 kgf-m, 29-39 ft. lbs.)