Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Electronic Brake Control Module: Testing and Inspection

1. Disconnect the ABS CM connector with the ignition switch at OFF.

CAUTION: Be careful not to damage the terminals during inspection.

2. Insert a thin isolation plate to the short bar of the connector

3. Attach a wire to the tester lead to avoid damaging the terminals then inspect voltage, resistance or continuity, referring to the following table.

SEE ALSO: Refer to Hydraulic Assembly testing procedures.