Standard

GENERAL SPECIFICATIONS
Maximum Back Face ring Gear Runout 0.102 mm (0.004 inch)
Differential Case Maximum Runout 0.076 mm (0.003 inch)
Differential side Gear Thrust Washer
Thickness 0.762-0.813 mm (0.030-0.032 inch)
Differential Pinion Gear Thrust Washer
Thickness 0.762-0.813 mm (0.030-0.032 inch)
Maximum Axle Shaft End Play 0.762 mm (0.030 inch)
Backlash Between ring Gear And Pinion Teeth: 0.203-0.381 mm [0.305-0.381 mm preferred] (0.008-0.015 inch [0.012-0.015 inch preferred])
Variation Between Teeth Ring Gear 0.102 mm (0.004 inch)
Maximum Pinion Runout 0.25 mm (0.010 inch T.I.R.)
RABS Sensor Air Gap 0.127-1.143 mm (0.005-0.045 inch)