Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1999 >> MX-5 Miata L4-1.8L DOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor: Service and Repair

1. Disconnect the negative battery cable.
2. Disconnect the camshaft position sensor connector.
3. Remove the camshaft position sensor installation bolt.
4. Remove the camshaft position sensor.
5. Make sure that the camshaft position sensor is free of any metallic sharings or particles. If metallic sharings or particles are found on the sensor, clean them off.
6. Install the camshaft position sensor in the reverse order of removal.

Tightening torque: 7.9-10.7 Nm (80-110 kg.cm, 69.5-95.4 in.lb)
pro multis · About Operation CHARM