Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1999 >> MX-5 Miata L4-1.8L DOHC >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Speed Sensor >> Testing and Inspection >> Output Speed Sensor Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Output Speed Sensor Inspection

OUTPUT SPEED SENSOR INSPECTION
1. Disconnect the negative battery cable.
2. Disconnect the output speed sensor connector.
3. Remove the output speed sensor.

Note: Resistance value output speed sensor varies with temperature. Normal resistance value occurs when the temperature is 20°C (68°F) but it may be abnormal at high temperatures. Therefore, do not determine the resistance value only at 20°C (68°F).





4. Measure the resistance between the terminals of the output speed sensor.
Resistance 387 - 473 ohms (20°C (68°F))
5. If not correct, replace the output speed sensor.
6. Install the output speed sensor.
Tightening torque 5.0 - 6.8 Nm (50 - 70 kgf-cm, 44 - 60 inch lbs.)
7. Connect the output speed sensor connector.
8. Connect the negative battery cable.
pro multis · About Operation CHARM