Shifter A/T: Testing and Inspection

SELECTOR LEVER INSPECTION
1. Turn the ignition switch to ON position.





2. With the brake pedal depressed, verify that there is a "click" at each range when shifted in the pattern shown.
3. Verify that the selector lever can only be shifted as shown.
4. Verify that a "click" sound at each position when shifted from P position to 1 range.
5. Verify that the positions of the selector lever and the selector indicator light are aligned.
- If not as specified, adjust the TR switch and/or selector cable.
6. Verify that the vehicle operates in each selected range.