Front Floor Covering

1. Disconnect the negative battery cable.
2. Remove the front seats.
3. Remove the second-row seats.
4. Remove the front scuff plate.
5. Remove the rear scuff plate.
6. Remove the console lower cover.
7. Remove the front side trim.
8. Remove the B-pillar lower trim.
9. Remove the lower anchor of the front seat belt installation bolt.
10. Remove the rear side trim.
11. Remove the long slider cover and adapter cover.
12. Remove the child anchor cover.
13. Remove the rear heater grilles.
14. Remove the parking brake cover.
15. Remove the rear heat duct. (For second-row seat)




16. Remove the fasterers, and remove the floor covering.
17. Remove the floor covering from the vehicle through the passenger-side front door.
18. Install in the reverse order of removal.