Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor: Service and Repair

1. Disconnect the crankshaft position sensor connector.
2. Remove the undercover.
3. Remove the crankshaft position sensor installation bolt.
4. Install in the reverse order of removal.

Tightening torque
7.9 - 10.7 N.m {80 - 110 kgf.cm, 69.5 - 95.4 in.lbf}

5. Reconnect the crankshaft position sensor connector.

NOTE: Do not forcefully pull the wiring harness of the crankshaft position sensor.

6. Adjust the air gap.