Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Output

OUTPUT SPEED SENSOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Disconnect the output speed sensor connector.
3. Remove the output speed sensor from the transmission.
4. Apply ATF to the new O-ring.
5. Install the O-ring to the output speed sensor.
6. Install the output speed sensor to the transmission.
Tightening torque
5.0 - 6.8 Nm (50 - 70 kgf.cm, 44 - 60 inch lbs.)
7. Connect the output speed sensor connector.
8. Connect the negative battery cable.