Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2000 >> Millenia V6-2.5L DOHC >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Mode Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Mode Switch: Service and Repair

HOLD SWITCH REMOVAL/INSTALLATION [GF4A-EL]
1. Disconnect the negative battery cable.
2. Remove the rear console, brake boot panel, and center panel.
3. Remove the indicator panel installation screws.
4. Disconnect the connector and remove the HOLD switch terminals.
5. Remove the selector lever knob component.
6. Install a new selector lever knob component.
Tightening torque
2.0 - 2.9 Nm (20 - 30 kgf.cm, 18 - 26 inch lbs.)
7. Install the HOLD switch terminals and connect the connector.
8. Install the indicator panel installation screws.
9. Install the center panel, brake boot panel, and rear console.
10. Connect the negative battery cable
pro multis · About Operation CHARM