Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2001 >> B4000 DS Cab Plus 4 2WD V6-4.0L SOHC >> Repair and Diagnosis >> Powertrain Management >> PROM - Programmable Read Only Memory >> Technical Service Bulletins >> All Technical Service Bulletins >> Engine Controls - Cold Engine Start Idle Dip
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Controls - Cold Engine Start Idle Dip

01-006/01

2001 B4000 COLD START IDLE DIP

APPLICABLE MODEL(S)/VINs:
All 2001 B4000 with automatic transmission built prior to 11/27/00.

DESCRIPTION

Some vehicles may exhibit a cold start idle dip when the automatic transmission is in PARK or NEUTRAL gears. This concern may be caused by the Powertrain Control Module (PCM) calibration.

Customers having this concern should have their vehicle repaired using the following procedure.

REPAIR PROCEDURE

1. Verify customer concern.





2. Reprogram the PCM to the latest level calibration (shown) using WDS if normal diagnostic procedures do not pinpoint condition.

NOTE:
Install an Authorized Modification Label on recalibrated PCM and enter the date, dealer code, and a summary of modifications performed including this Service Bulletin's number.

3. Verify repair.





WARRANTY INFORMATION

NOTE:
This information applies to verified customer complaints on vehicles covered under normal warranty. Refer to the SRT microfiche for warranty term information.





Disclaimer
pro multis · About Operation CHARM