Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2001 >> Tribute ES 4WD V6-3.0L DOHC >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation

Installation

Caution: A new power take off (PTO) unit driver, gear seal must be installed any time the power take off (PTO) unit is removed.





1. Install the power take off (PTO) unit.
1 Install the bolts.





2. Connect the power take off (PTO) unit vent hose to the vent tube.





3. Install the bolt.





4. Install the crossmember brace and the four bolts.





5. Install the bracket and the six bolts.
6. Install the RH exhaust manifold.
7. Install the drive axle intermediate shaft. Refer to Drive Axles, Bearings and Joints; Axle Shaft Assembly, Constant Velocity Type; Short Shaft.





8. Install the heat shield.
1 Install the three bolts.
9. Install the exhaust crossover pipe.
10. Install the driveshaft.
11. Check the power take off (PTO) unit fluid level.
12. Connect the battery ground cable.
13. Check the transaxle fluid level.
pro multis · About Operation CHARM