Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Engine Mounting AJ without Variable Valve Timing
ENGINE MOUNTING 1.
Install the SST (engine hanger) to the cylinder block holes as indicated in the figure, and tighten the SSTs (bolts).
2.
Mount the engine on the SST (engine stand).
3.
Drain the engine oil into a container.
4.
Clean the flange surface (seal rubber) of the drain plug, then install the plug.
Tightening torque
22-30 N-m (2.2-3.1 kgf-m, 16-22 ft-lbf)
