Timing Components: Specifications

TIMING CHAIN








CRANKSHAFT PULLEY TORQUE







- Install the M6 x 1.0 bolt by hand.
- Rotate the crankshaft clockwise until the crankshaft is in the No.1 cylinder TDC position (until the balance weight is contacting to the SST).





- Hold the crankshaft pulley using the SSTs.
- Tighten the crankshaft pulley lock bolt in the order shown following two steps using the SST (49 D032 31 6).
1) Tighten to 96 - 104 Nm (9.8 - 10.6 kgf-cm, 70.9 - 76.7 ft. lbs.)
2) Tighten 87° - 93°
- Remove the M6 x 1.0 bolt.

TIMING CHAIN TENSIONER
Torque: 8-11.5 Nm (70.9-101.7 in lbs)