Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2003 >> MPV V6-3.0L DOHC >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Technical Service Bulletins >> Customer Interest >> Ignition, A/T - Can't Remove Key From Ignition Lock
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition, A/T - Can't Remove Key From Ignition Lock

TSB: 05-006/06

2002 - 2006 MPV
CANNOT PULL KEY OUT OF IGNITION SWITCH

APPLICABLE MODEL(S)/VINS
2002 - 2006 MPV

DESCRIPTION

On some vehicles, the ignition key cannot be pulled out of the ignition switch after shifting the selector lever into P-range. This occurs from someone applying excessive force to the selector lever. The guide plate moves out of position causing poor contact in the P-range switch.

Customers having this concern should have their vehicle repaired using the following repair procedure.

REPAIR PROCEDURE

1. Verify customer concern.

2. Replace the Change Control (gear selector lever) according to the Workshop Manual (section 05-18 P POSITION SWITCH (BUILT-IN SELECTOR LEVER) INSPECTION).

3. Verify repair.





PART(S) INFORMATION





WARRANTY INFORMATION

NOTE:
^ This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair. Refer to the Warranty Wizard for warranty term information.

^ Additional diagnostic time cannot be claimed for this repair.





Disclaimer
pro multis · About Operation CHARM