Parking Brake Lever: Service and Repair
PARKING BRAKE LEVER REMOVAL/INSTALLATION1. Remove the main silencer.
2. Remove the heat insulator.
3. Remove the console.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
6. After installation, inspect the parking brake lever stroke.
Rear Parking Brake Cable Installation Note
1. Pass the rear parking brake cable inside the rear ABS wheel-speed sensor wiring harness as shown in the figure.
2. Install the rear parking brake cable.
Front Parking Brake Cable Installation Note
1. Install the front parking brake cable with the mark on the equalizer facing toward the vehicle downside.