Rear Wheel Alignment

REAR WHEEL ALIGNMENT (UNLOADED)

NOTE: Fuel tank full. Engine coolant and engine oil are at specified levels. Spare tire, jack and tools are in designated position. Adjust to the median when carrying out wheel alignment.

TOTAL TOE-IN 3±4 mm (0.12±0.16 in.) (0°17'±24' degrees)

CAMBER ANGLE
Height from center of wheel to rear fender brim.
337-346 mm (13.3-13.6 in.) -0°38'±1°
347-356 mm (13.7-14.0 in.) -0°49'±1°
357-366 mm (14.1-14.4 in.) -1°±1°
367-376 mm (14.5-14.8 in.) -1°16'±1°
377-386 mm (14.9-15.2 in.) -1°32'±1°

NOTE: Difference between left and right must not exceed 1°30'.

THRUST ANGLE 0°±48'