Transmission Oil Replacement

TRANSMISSION OIL REPLACEMENT





1. Position the vehicle on level ground.
2. Remove oil filler plug and drain plug, and then drain the oil.
3. Clean drain plug.
4. Install drain plug and a new washer.
Tightening torque 27 - 48 Nm (2.8 - 4.9 kgf-cm, 20 - 35 ft. lbs.)





5. Add the specified amount and type of oil through the plug port for oil filler plug to near the brim of the port.
Specified oil grade
API Service GL-4 or GL-5
Specified oil viscosity
SAE 75W-90
Capacity (approximately quantity) 1.75 L (1.85 US qt. 1.54 Imp qt)





6. Install oil filler plug and a new washer.
Tightening torque 27 - 48 Nm (2.8 - 4.9 kgf-cm, 20 - 35 ft. lbs.)