Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2005 >> RX8 2RTR-1.3L >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Testing and Inspection >> Programming and Relearning
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Programming and Relearning

EPS SYSTEM NEUTRAL POSITION SETTING
1. Set the front wheels in the straight-ahead position. (Steering wheel is within 45° to the left or right of center position.)
2. Jack up both front tires so that there is no weight on them.
3. Lower the jack until the front tires touch the ground. At this time, be careful not to touch the tires or the steering wheel.





4. Connect the WDS or equivalent to the DLC-2.
5. Set to neutral by selecting the TRQ_S_CAL active command mode function.
6. After setting to neutral, start the engine, rotate the steering wheel slowly in both directions within a range of 90°, and verify that the steering force does not differ in either directions.
^ If the steering force is different in either direction, inspect the power steering system following a separate troubleshooting procedure.
pro multis · About Operation CHARM