Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2005 >> Tribute 4WD L4-2.3L >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Service and Repair >> Weld Nut Repair >> "J" Nut, Restraints Control Module (RCM) and Side Impact Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

"J" Nut, Restraints Control Module (RCM) and Side Impact Sensor

WELD NUT REPAIR SENSOR - "J" NUT, RESTRAINTS CONTROL MODULE (RCM) AND SIDE IMPACT

NOTE: The following procedure applies to vehicles that have a rectangular hole in the sheet metal that is in close proximity to the missing weld nut

1. Depower the system. See SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPOWERING AND REPOWERING.
2. Obtain the proper "J" nut.
3. Obtain a 6 mm (0.24 in) grounding screw or equivalent.
4. Install the "J" nut through the rectangular hole in the sheet metal.

NOTE: Be sure the threaded portion of the "J" nut is aligned with the clearance hole in the sheet metal.

5. Install the crash sensor.
6. Tighten the attaching screws to specification See Torque Specifications.
pro multis · About Operation CHARM