Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2006 >> 3 L4-2.3L >> Repair and Diagnosis >> Heating and Air Conditioning >> Blower Motor Resistor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Blower Motor Resistor: Service and Repair

RESISTOR REMOVAL/INSTALLATION
1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Remove the following parts.
1. Side wall
2. Accelerator pedal

4. Disconnect the blower motor cooling pipe connected to the blower motor.
5. Disconnect the resistor connector.
6. Remove the resistor.




7. Affix the gummed tape to the thread hole area as shown in the figure. (Do not wrap the packing tape around the backside of the resistor.)




8. Stick the screw into the thread hole.
9. Set the resistor to the A/C unit and temporarily tighten the hexagon head screw.

CAUTION: While setting the resistor, be careful not to damage the pattern surface. Otherwise it could cause a resistor operation malfunction.

10. Tighten the lower screw.
11. Tighten the hexagon head screw.
12. Connect the resistor connector.
13. Connect the blower motor cooling pipe.
14. Install the following parts:
1. Accelerator pedal
2. Side wall

15. Connect the negative battery cable.
16. Install the battery cover.
pro multis · About Operation CHARM