Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Wheel Alignment

REAR WHEEL ALIGNMENT





Specification (Unloaded)*1

1 Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
2 Difference between left and right must not exceed 1° 30' .

Note Total toe-in measuring position





^ Tire: A indicated in the figure (between the center of the tires)
^ Rim inner: B indicated in the figure (between the inner side of the rims)

Total Toe-in Adjustment





1. Loosen the installation nut of the adjusting cam bolt.





2. Rotate the adjusting cam bolt in either direction to adjust the camber.
3. Tighten the nut.
Tightening torque 80.0 - 100.0 Nm (8.16 - 10.19 kgf-m, 59.01 - 73.75 ft. lbs.)