Rear

REAR DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts.
1. Sail garnish (5 door)
2. Rear door garnish (5 door)
3. Regulator handle (Vehicles with manual window system)
4. Rear door trim
5. Rear door glass
6. Rear door speaker
7. Inner handle
8. Rear door unit

3. Pull the stopper of the rear door lock actuator connector in the direction of the arrow (1).




4. Disconnect the rear door lock actuator connector while pushing at point A.
5. Remove the rear door latch and lock actuator from the rear door unit.
6. Install in the reverse order of removal.