Crankshaft Pulley Assembly Note

Crankshaft Pulley Assembly Note
1. Using the silicone sealant, seal the keyway in the crankshaft pulley.





2. Install the crankshaft pulley using the SST and washer of crankshaft pulley lock bolt washer.





3. Hold the flywheel (MTX) or the drive plate (ATX) using the SST.
4. Tighten the crankshaft pulley lock bolt in four steps.
1) Tighten to 120 N-m (12.2 kgf-m, 88.5 ft-lbf).
2) Loosen 360° (one full turn) in reverse order.
3) Tighten 47-53 N-m (4.8-5.4 kgf-m, 35-39 ft-lbf).
4) Tighten 85°-95°.