Instrument Panel Register Duct
INSTRUMENT PANEL REGISTER DUCT REMOVAL / INSTALLATION - LH1. Remove the LH instrument panel finish panel, see INSTRUMENT PANEL REGISTER REMOVAL / INSTALLATION - LH.
2. Remove the two screws and remove the LH instrument panel register duct.
3. Install in reverse order of removal.
INSTRUMENT PANEL REGISTER DUCT REMOVAL / INSTALLATION - RH
Removal / Installation
1. Remove the RH instrument panel register, see INSTRUMENT PANEL REGISTER REMOVAL / INSTALLATION - RH.
2. Remove the passenger side air bag module.
3. Remove the two RH instrument panel register duct screws then remove the duct.
Tightening Torque: 2 - 3 N.m {20 - 30 kgf.cm, 18 - 26 in.lbf}
4. Install in reverse order of removal.
INSTRUMENT PANEL DUCT REGISTER CENTER REMOVAL / INSTALLATION
1. Remove the center instrument panel register. See INSTRUMENT PANEL REGISTER CENTER REMOVAL / INSTALLATION.
2. Remove the center instrument panel register duct screws then remove the duct.
Tightening torque: 2 - 3 N.m {20 - 31 kgf.cm, 18 - 26 in.lbf}.
3. Install in reverse order of removal.