Body Control Module (BCM) Inspection

BODY CONTROL MODULE (BCM) INSPECTION

1. Remove the glove compartment.
2. Remove the BCM with the connector connected.

Terminal Voltage Table (Reference) Part 1:

Terminal Voltage Table (Reference) Part 2:

Terminal Voltage Table (Reference) Part 3:

Terminal Voltage Table (Reference) Part 4:

Terminal Voltage Table (Reference) Part 5:

Terminal Voltage Table (Reference) Part 6:

3. Measure the voltage at each terminal and inspect for the continuity between the terminals and ground is as indicated in the Terminal Voltage Tables (Reference).
- If the voltage or continuity is not as specified in the Terminal Voltage Table (Reference), inspect the parts under "Inspection item (s)".
- If the system does not work properly even though the parts or related wiring harnesses do not have any malfunction, replace the BCM.