Carpet: Service and Repair
FLOOR COVERING REMOVAL/INSTALLATION1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Front seat
2. Second-row seat
3. Edge cover
4. long slider cover
5. Trunk box
6. Seat side box
7. Trunk end trim
8. Third-row seat
9. Dashboard undercover
10. Front scuff plate inner
11. Front side trim
12. Dust cover
13. Side wall
14. Console panel
15. Console cover
16. Decoration ration panel
17. Front console box mat
18. Indicator panel
19. Front console box
20. Console
21. Rear scuff plate inner
22. Front seat belt lower anchor installation bolt (Driver side)
23. B-pillar lower trim
24. Third-row seat belt lower anchor installation bolt
25. Trunk side trim
26. Fuel-filler lid release cover
3. Remove the fasteners A and B.
4. Remove the nut.
5. Take the floor covering out from the opened liftgate.
6. Install in the reverse order of removal.