System Specifications

ENGINE TECHNICAL DATA

Engine Technical Data:

Engine Technical Data:

Cylinder Head Bolt Re-usability





Measure the length of each cylinder head bolt. Replace any that exceed the maximum length.
Cylinder Head Bolt Length L 145.2-145.8 mm (5.72-5.74 in)
Cylinder Head Bolt Maximum 146.5 mm (5.77 in)





Cylinder Head Bolt
1. Tighten to 5.0 N-m (51.0 kgf-cm, 44.3 in-lbf)
2. Tighten 13-17 N-m (1.4-1.7 kgf-m, 10.0-12.5 ft-lbf)
3. Tighten 44-46 N-m (4.5-4.6 kgf-m, 32.5-33.9 ft-lbf)
4. Tighten 88°-92°
5. Tighten 88°-92°





Camshaft Bearing Caps

Apply the gear oil (SAE No. 90 or equivalent) to each journal of the camshaft as shown in the figure.
Temporarily tighten the camshaft bearing caps evenly in two or three steps.
Tighten the camshaft cap bolts in the order shown with the following two steps.
1. Tighten to 5.0-9.0 N-m (51.0-91.7 kgf-cm, 44.3-79.6 in-lbf)
2. Tighten to 14.0-17.0 N-m (1.5-1.7 kgf-m, 10.4-12.5 ft-lbf)

Exhaust camshaft sprocket lock bolt

Tightening torque 69-75 N-m (7.1-7.6 kgf-m, 50.9-55.3 ft-lbf)

Variable valve timing actuator tightening bolt

Tightening torque 69-75 N-m (7.1-7.6 kgf-m, 50.9-55.3 ft-lbf)





Oil pump bolts
Tightening torque
1. Tighten 8-12 N-m (82-122 kgf-cm, 71-105 in-lbf)
2. Tighten 17-23 N-m (1.8-2.3 kgf-m, 12.6 16.9 ft-lbf)