Liftgate

LIFTGATE LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the liftgate upper trim.
3. Remove the liftgate side trim.
4. Remove the liftgate lower trim.
5. Disconnect the liftgate lock actuator connector and liftgate latch switch connector.
6. Detach the rod from the liftgate key cylinder.




7. Remove the clips.
8. Remove the bolts.
9. Remove the liftgate latch and lock actuator




10. Detach the cable from the liftgate latch and lock actuator.
11. Install in the reverse order of removal.