Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2008 >> 3 L4-2.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Service and Repair >> Overhaul >> Overhaul Procedures G35M-R >> Secondary Shaft Components Assembly >> 1ST Gear, 1ST Synchronizer Ring, and 1ST/2ND Clutch Hub Component Assembly Note
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

1ST Gear, 1ST Synchronizer Ring, and 1ST/2ND Clutch Hub Component Assembly Note

1st Gear, 1st Synchronizer Ring, and 1st/2nd Clutch Hub Component Assembly Note





Note: The size of the 1st, 2nd, 3rd, and 4th synchronizer rings are the same.





1. Assemble the 1st gear, 1st synchronizer ring, inner cone, double cone and 1st/2nd clutch hub component, as shown in the figure.





2. Press the 1st/2nd clutch hub component on using the SST.
pro multis · About Operation CHARM