Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2008 >> 5 L4-2.3L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Service and Repair >> Overhaul >> Manual Transaxle G35M-R >> Overhaul Procedures G35M-R >> Secondary Shaft Components Preinspection >> 1ST Gear Thrust Clearance Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

1ST Gear Thrust Clearance Inspection

1st Gear Thrust Clearance Inspection





1. Measure the clearance between 1st gear and the differential drive gear.
^ If the clearance exceeds the maximum, check the contact surfaces of the 1st gear, differential drive gear of the secondary shaft gear, and 1st/2nd clutch hub component. Replace worn and damaged parts.

Clearance:
0.05 - 0.28 mm (0.002 - 0.011 in)
Maximum:
0.33 mm (0.013 in)
pro multis · About Operation CHARM