Brake Rotor/Disc: Specifications

Front
Front disc plate runout limit 0.05 mm (0.002 in)
Minimum front disc plate thickness 23 mm (0.91 in)
Minimum front disc plate thickness after machining using a brake lathe on-vehicle 23.8 mm (0.94 in)

Rear
Rear disc plate runout limit 0.05 mm (0.002 in)
Minimum rear disc plate thickness
L3, AJ: 8 mm (0.31 in)
L3 with TC: 9 mm (0.35 in)
Minimum rear disc plate thickness after machining using a brake lathe on-vehicle
L3, AJ: 8.8 mm (0.35 in)
L3 with TC: 9.8 mm (0.39 in)