Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2008 >> B2300 L4-2.3L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Front >> 2WD
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

2WD

WHEEL SPEED SENSOR - FRONT, 2WD





Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the negative battery cable.
3. Disconnect the wheel speed sensor electrical connector.
4. Remove the wheel speed sensor harness bolt and unclip the retainers.
5. Remove the wheel speed sensor bolt and the wheel speed sensor.
^ To install, tighten to 8 N-m (0.8 kgf-m, 71 in-lbf).

Note:
^ Plug the sensor cavity and thoroughly clean the sensor mounting surface. Apply wheel bearing grease to the mounting surface.

6. To install, reverse the removal procedure.
pro multis · About Operation CHARM