Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2008 >> B4000 V6-4.0L >> Repair and Diagnosis >> Cruise Control >> Cruise Control Switch >> Service and Repair >> Cruise Control Deactivator Switch
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control Deactivator Switch

CRUISE CONTROL DEACTIVATOR SWITCH REMOVAL / INSTALLATION





Removal and Installation

Caution:
Do not press the brake pedal when removing or installing the cruise control deactivator switch or damage to the switch will occur.

1. Disconnect the cruise control deactivator switch electrical connector.
2. Rotate the cruise control deactivator switch counterclockwise 45 degrees and remove it. Disconnect the electrical connector.

Note:
The cruise control deactivator switch is selfadjusting. Do not press the brake pedal during installation. Initial installation of the cruise control deactivator switch allow for one adjustment. If additional adjustments are necessary, install a new cruise control deactivator switch.

3. To install, reverse the removal procedure.
pro multis · About Operation CHARM