Suspension Design Height Setting

SUSPENSION DESIGN HEIGHT SETTING

Note:
^ Make sure the vehicle is on a flat, level surface, such as a drive-on hoist.

1. Jounce the vehicle's front and rear suspension to normalize the vehicle static ride height.
2. Measure the ride height. See CAMBER AND CASTER ADJUSTMENT.





Note:
^ The torsion bar adjusting bolt is coated with a thread locking compound that wears off after disassembly. If the torsion bar system is ever disassembled or if the torsion bar adjusting bolt is ever removed, use a new torsion bar adjusting bolt when assembling.

3. Adjust the ride height as follows:
^ To increase the ride height, tighten the torsion bar adjusting bolt.
^ To decrease the ride height, loosen the torsion bar adjusting bolt.