Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2008 >> B4000 V6-4.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Tank Pressure Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Tank Pressure Sensor: Service and Repair

FUEL TANK PRESSURE SENSOR REMOVAL / INSTALLATION

1. With the vehicle in NEUTRAL, position it on a hoist. See LIFTING.

2. Disconnect the electrical connector.






NOTE: A new vapor line assembly must be installed for a new pressure sensor to be installed.

3. Remove the fuel tank pressure sensor and fuel line assembly.

4. To install, reverse the removal procedure.
- Perform Leak Test. See EVAPORATIVE EMISSION SYSTEM LEAK TEST. Testing and Inspection
- Perform the Evaporative Emission Running Loss Monitor Repair Verification Drive Cycle Test. See DRIVE CYCLES. Driver Cycles
pro multis · About Operation CHARM