Ignition Key Release Button

IGNITION KEY RELEASE BUTTON

Ignition Key Release Button:

Removal and Installation
1. Disconnect the negative battery cable.
2. Remove the ignition switch lock cylinder.
3. If equipped, remove the tilt release lever/ handle.
4. Remove the 3 steering column cover screws and the upper and lower steering column covers.
5. Remove the key release button bolt and the key release button and spring.
^ To install, tighten to 5 N-m (0.5 kgf-m, 44 in-lbf).
6. To install, reverse the removal procedure.