Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2008 >> B4000 V6-4.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Shift Linkage >> Shift Cable >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Shift Cable: Service and Repair

SHIFT CABLE AND BRACKET REMOVAL / INSTALLATION








1. Disconnect the transmission selector lever cable from the steering column.
(1) Disconnect the selector lever cable from the transmission column shift selector tube.
(2) Disconnect the selector lever cable from the steering column bracket.
2. Push the rubber grommet and selector lever cable through the bulkhead.
3. With the vehicle in NEUTRAL, position it on a hoist.
4. Disconnect the selector lever cable from the locking clip.





5. Remove the transmission selector lever cable from the manual lever.





6. Remove the selector lever clip and remove the cable from the bracket.





7. Remove the transmission selector lever cable bracket from the automatic transmission.





8. To install, reverse the removal procedure.

Tightening torque
40 Nm (4.1 kgf-m, 30 ft-lbf)
^ Move manual lever into overdrive (O/D) range.
^ Adjust the transmission shift cable.
pro multis · About Operation CHARM