Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2008 >> B4000 V6-4.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Mount >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Mount: Service and Repair

AUTOMATIC TRANSMISSION INSULATOR AND RETAINER REMOVAL / INSTALLATION

Removal Note
1. Remove the rear propeller shaft.
2. Remove the transmission mount nuts.





3. Raise and support the transmission.





4. Remove the transmission mount.
(1) Remove the transmission mount-to-extension housing bolts.
(2) Remove the transmission mount.





Installation Note
1. Install the transmission mount.
(1) Position the transmission mount on the extension housing.
(2) Install the transmission mount-to-extension housing bolts.





2. Install the transmission mount into the crossmember and tighten the transmission mount nuts.





Note:
^ Align the propeller shaft with the marks made during removal to ensure correct balance.

3. Align and install the rear propeller shaft.





4. Install the rear propeller shaft bolts.





5. Lower the vehicle.
6. Fill the transmission to proper fluid level. Check for proper transmission operation.
pro multis · About Operation CHARM