Disassembly Procedure

Disassembly Procedure





1. Remove the thrust washer from the front planetary gear component.





2. Remove the front planetary gear component from the input shaft.





3. Remove the thrust washer from the front planetary gear component.

Note: In some cases, the thrust washer may be detached with the input shaft attached.





4. Remove the front planetary sun gear, thrust bearing and the bearing race from the input shaft.

Note: If it is difficult to remove the bearing race, pry it off gently using a flathead screwdriver.





5. Remove the seal rings from the input shaft.





6. Remove the seal rings from the input shaft.