Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Bearing Snap Ring Assembly Note

Rear Bearing Snap Ring Assembly Note

1. Install a new snap ring to the secondary shaft.
2. Measure the clearance between the rear bearing inner race and the snap ring.
^ If not within the specification, adjust it by selecting a proper snap ring from below.

Clearance between secondary shaft (NO.1) rear bearing inner race and snap ring: 0.0 - 0.1 mm (0.0000 - 0.0039 in)

Secondary shaft (NO.1) rear bearing inner race snap ring size