Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2008 >> RX8 2RTR-1.3L >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Trim Panel >> Service and Repair >> Removal and Replacement >> Center Panel Module Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Center Panel Module Removal/Installation

CENTER PANEL MODULE REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the ashtray panel.
3. Remove the lower panel.




4. Remove the screws and bolt.




5. Pull the center panel module outward, and then detach clip A from the dashboard.
6. Remove the ventilator grille (center).




7. Put your hand through the opening where the ventilator grille was removed and disconnect the connectors and the antenna feeder.

CAUTION: When putting your hand through the opening, be careful not to contact the panel edge or sharp parts to avoid injury.

8. Install in the reverse order of removal.

CAUTION: When installing the center panel module, make sure that the wiring harness and antenna feeder are not caught between the unit and dashboard. If the wiring harness or the antenna feeder is caught between the unit and dashboard, It may cause malfunctions.
pro multis · About Operation CHARM