Camber Adjustment
Camber AdjustmentCaution:
^ Adjust the camber before adjusting the caster.
Note:
^ The camber and caster change largely if the front cam is adjusted due to the suspension construction. If the rear cam is adjusted, the caster largely, however, the camber barely changes. Therefore, adjust the camber (front cam) and then the caster (rear cam) to adjust the alignment efficiently.
1. Loosen the fixing nut of the adjusting cam bolt (front lower arm front side).
2. Rotate the adjusting cam bolt in either direction to adjust the camber.
Standard Suspension:
Sport Suspension:
* : From the end of the front fender to the center of the wheel (mm {in})
Note: Refer to the figure for the adjusting angle per one graduation.
3. Tighten the nut.
Tightening torque 117.7-137.3 N-m (12.1-14.0 kgf.m, 86.9-101.2 ft-lbf)
4. Adjust the toe-in.